Before the die-casting mold making, we must first of its structure as well as the specific production requirements for the design, so as to ensure smooth production work carried out, while ensuring that production out of die-casting mold can be a good work. For this purpose, in the design, to be considered when designing these things. First, with the die-casting mold with other devices. Because it is not used independently, but to die casting machine, as well as with the material, which is die-casting of three elements that are essential and therefore must be considered when designing and fitting the other two factors, say it The shape and size as well as thickness is not, and die-casting machine specifications with each other, not within the range can be clamped. Secondly, to facilitate the installation, removal, operation as well as handling. Design of the time it is best not to die-casting mold design is too bulky, so it is very inconvenient to use. Meanwhile, in order to facilitate its use, handling, etc., you can also install some bolts at the top of both sides. Finally, on the structure and affordability of further consideration. Such as its tolerance to high pressure at high intensity work can be a good work, but will not be deformed or damaged. At the same time the internal structure of each part should be reasonable.